Set the hotswitch on h9 in control3/5/2023 By default, PC124 is toggle, PC125 is bypass and PC126 is activate. If you are sending MIDI bypass/activate to the H9 - would seem that you are sending the toggle MIDI message, rather than an explicit activate or bypass. Is there a way to lock it so it stays lit correctly?Ĭan you clarify if you are using the Helix to send a bypass/activate/toggle MIDI message to the H9, or are you bypassing/activating an FX loop on the Helix? Same thing goes with the hotswitch button on the H9. I've tried messing around with dim and lit settings but can't seem to get it to work properly. Problem is when I switch patches the light is always reversed to how I want it. I'm trying to set up the helix to bypass and activate the H9. If I save pc5 it won't load that with the saved preset When I scroll up with the PC message nothing seems to happen on the h9. H91 is set up to midi channel 3 and H92 is set up to midi channel 4. Thanks for the reply! Followed the instructions as per your setup. I like to keep it simple, but if you are doing a lot of MIDI automation, the H9's extra capabilities could come in handy. The H9 has some additional MIDI capabilities to map PC messages to different settings, but you'll need to read the manual for details on that. You have to unplug the USB cable to get it to work with commands coming from the Helix. One other thing - if you are connecting your computer to the H9 via USB, it ignores all MIDI commands coming over the MIDI ports. The H9 counts from 0, so in this case, PC #5 loads what shows on the H9 as bank 6. You simply issue a PC message with the program # set to the H9 bank. The H9 wants a MIDI PC message (not a CC, as tomas infers above) to switch settings. You set this up on the default snapshot for a preset, or on each snapshot in a preset if you want the H9 to switch from snapshot to snapshot. If you are using two H9s, give them separate IDs and then send a separate command for each. In this case, my H9 is set up as MIDI Id 3. I'm at my computer right now, so here's a screenshot of how to set up the instant command to control an H9. Anyway I could get a more detailed description of how its actually setup for ya'll? :unsure: :unsure: You can also map the H9s to call up presets that aren't the same preset number that the Helix transmits (such as triggering PC 2 in Helix calls up preset 4 in the H9). That can be taken further and have commands sent when snapshots are triggered. The second way (and what I use) is to set up MIDI commands to send when a preset is loaded. If you have a one-to-one correspondence between your Helix presets and your H9 presets, the Helix can automatically send out a PC when a preset is loaded, but the preset numbers have to correspond. There are two ways to trigger the PC commands the H9 needs. I have not tried sending MIDI expression signals from the Helix to either stomp, so can't comment on that type of use. My chain goes Helix -> H9 -> HOG2, and the MIDI CC signals I send to HOG have the intended effect. I've also a EHX HOG2 which has MIDI control. Just make sure to set up your H9s with different MIDI channel IDs so you can load different presets on each. Easy to have the Helix send out multiple PC commands. I have a H9, and set up a MIDI PC command to send to the H9 when the Helix loads a preset that uses the H9. Yes, the Helix can recall presets from the H9s.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |